This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.
Sturdy all-metal housing
Up to 3000 frequencies in up to 75 MHz switching bandwidth
20 fixed frequency banks with up to 32 compatible presets
6 banks with up to 32 tunable channels
Adaptive-diversity technology for high reliability
Pilot tone squelch can be set in 2 dB steps for interference-free reception
Frequency scan feature searches for available reception frequencies
Wireless synchronization of receiver parameters from transmitter
User-friendly menu interface with a backlit graphic display
HDX compander for crystal clear sound
Enhanced AF frequency response
Backlit graphic display
4-stage battery status display
Charging contacts for recharging BA2015
Auto-lock feature to prevent settings from being changed accidentally
Hi Boost, adjustable limiter, stereo/focus mode, selectable balance on receiver
Wide range of accessories for virtually any use
Specifications for SR 2000 IEM, SR 2050 IEM and EK 2000 IEM
Good dependable unit but heavy than i would have liked
For the Sennheiser 2000 Series equipment there is a proprietary rechargeable battery system that is designed specifically for these products to ensure the best operation time possible when using rechargeable batteries.
The rechargeable battery system consists of the following components:
- BA2015G2 = (rechargeable battery pack)
- L2015 = (charger for two units)
- LA2 = (charging slot-in adapter for a G3 or 2000 series handheld microphone)
- NT1-120 = (power supply for a single L2015 charger)
- NT3-1-US = (power supply for up to three (3) L2015 chargers daisy chained together)
NOTE: The BA2015G2 battery pack can be placed directly into the L2015 charger for charging. When using the BA2015G2 battery pack in a SK or EK device the whole body pack can slot directly into the charger to charge the battery packs allowing charging in the device.
When a handheld microphone is used in conjunction with the LA2 adapter the handheld microphone and LA2 adapter can slot directly into the charger to charge the battery pack without having to remove the battery pack from the handheld microphone.
To help select an appropriate operating frequency range for wireless microphones and wireless IEM systems for your geographical area we offer a tool on our website called the Frequency Finder: (http://en-us.sennheiser.com/service-support-frequency-finder).
From the control panel in the upper left corner of the page type in your zip code and click on your town or city from the pop-up list. Once the zip code is entered and the town/city selected then click SEND. The Frequency Finder queries the FCC database and reports back a list of broadcast facilities and their relative signal strengths at your location (determined by power and distance).
The results of the Frequency Finder should be interpreted as follows:
- "white" = indicates strong broadcast facility signals that might disrupt your system and would likely cause issues if these frequencies were to be used.
- "yellow" = indicates weak broadcast facility signals that should be able to be worked around to find some available frequencies to use.
- "green" = indicates vacancies (ie: no broadcast facility signals) and should result in plenty of available frequencies to use.
NOTE: Once the Frequency Finder results list has been generated a new drop down menu labelled RANGE will appear just above the RESET and SEND buttons. From the RANGE drop down menu you can select the product range that you are interested in and once a product range is selected the different operating frequency ranges of the selected product range will overlay on the Frequency Finder results list as a pale BLUE HIGHLIGHT so you can see where the frequency ranges fall. From here you can review the Frequency Finder results list to determine what operating frequency range would be optimal for your region.
The default settings of the Frequency Finder are set for general use both indoors and outdoors. If the initial results list doesn't appear to show any available frequencies try changing the "ATT" drop down menu from 30 dB to 40 dB and the color indicators for available frequencies will adjust accordingly.
NOTE: In a vacant television channel you can operate up to 8 wireless microphone systems or about 6 wireless IEM systems.
NOTE: All frequencies above 700MHz are reserved by the government to facilitate the use of internet capable mobile devices. Government regulations prohibit the sale and use of equipment that operates in these frequencies in the United States.