On-Table Boundary Microphone

MEB 114-S

Wired table boundary microphone with half-cardioid pickup pattern. Thanks to its sturdy housing and high-quality microphone capsule, the MEB-S 114 guarantees optimum speech intelligibility. The MEB 114-S has a programmable microphone button (PTT, PTM, Toggle on/off, Permanent on) and a two-color LED ring as a status indicator. The TTL logic output on the underside can be used to activate a camera or media control system. The model is available in black and white color.
Choose product variant

Overview

The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.


Features

  • Microphone modes
    Toggle on/off
    Push to mute
    Push to talk
    permanent on (external LED control)


What's in the box?

  • MEB 114 Microphone
  • Quickguide
  • Cable

Technical Data

  • Color
    black
    white
    nextel grey
    LED light ring: red / green
  • Dimensions
    85 x 100 x 25 mm (WxDxH)
  • Connector
    clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)
  • Frequency response
    40 Hz – 20 kHz
  • Max. sound pressure level
    140 dB
  • Transducer principle
    pre-polarized condenser microphone
  • Weight
    291 g
  • Pick-up pattern
    cardioid
  • Nominal impedance
    200 Ω
  • Phantom powering
    P 24 - P 48
  • Operating temperature
    -10 ° … +50 °C
  • Equivalent noise level
    29 dB (A)
  • Equivalent noise level weighted as per CCIR 468-3
    39 dB (CCIR)
  • Current consumption
    5.3 mA
  • Output voltage
    Logic out: High level output voltage > 2.4 V, low level output voltage < 0.4 V
  • Output voltage
    Logic in: High level input voltage > 2.0 V, Low level input voltage < 0.8 V
  • Acoustics
    boundary layer microphone
  • Dynamic range
    111 dB (A)
  • Sensitivity
    10 mV/Pa

Downloads

  • Spec Sheets
    • Product Specification MEB 114, MEB 114-S (340 KB) Download

    • Product specification Dante™ Kit MEB 114-S (390 KB) Download

  • Quick Guides
  • Digital Brochures
    • Product brochure SpeechLine Wired (1.9 MB) Download

  • Technical Drawings
    • Outline dimensions MEB 114-S (DWG) (430 KB) Download

  • Safety Guides
    • Safety instructions Speechline Series (1.5 MB) Download

  • Instruction Manual
    • Instruction Manual SpeechLine Wired (5.1 MB) Download

  • Technical Information
    • Connection Guide MEB 114 & MEB 114-S (440 KB) Download

    • Connection Guide 2x MEB 114-S with Polycom SoundStructure (190 KB) Download

    • Connection Guide 2x MEB 114-S with TeamConnect (310 KB) Download

    • Connection Guide 2x MEB 114-S with Biamp Nexia / Tesira (130 KB) Download

    • Application guide SpeechLine microphones (1.9 MB) Download